Difficulty
Moderate
Steps
6
Time Required
15 - 30 minutes
Sections
2
- Back Cover
- 4 steps
- Camera
- 2 steps
Flags
0
BackDreamax DMX-ST7A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Position the tablet so the ports and screws are facing you.
Position the tablet so the ports and screws are facing you.
1024
Step 2
- Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.
Remove the two 2.5mm screws using the Phillips #00 precision screwdriver.
Step 3
- Use the plastic opening tool to assist in removing the back cover.
Use the plastic opening tool to assist in removing the back cover.
Step 4
- Upon removing the back cover position the tablet as seen in the picture.
Upon removing the back cover position the tablet as seen in the picture.
Step 5
Camera
- Lift the black bar towards the right to expose the data strip.
Lift the black bar towards the right to expose the data strip.
Step 6
- Remove the data strip and camera.
Remove the data strip and camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Stacey Mattila
Member since: 03/18/2015
543 Reputation
5 Guides authored
Badges:
15
+12 more badges
Team
Michigan Tech, Team 1-4, Lauer Spring 2015
Member of Michigan Tech, Team 1-4, Lauer Spring 2015
MTU-LAUER-S15S1G4
2 Members
10 Guides authored
