Difficulty

Moderate

Steps

3

Time Required

                          25 minutes

Sections

1

  • Speaker Removal
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDOSS SoundBox

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Speaker Removal
  • Use the JIS #00 screwdriver to remove the 3/32" screws that secure the speaker to the body.
  • Remove the smaller 3/32" screws that secure the left side of the speaker with a JIS #1 screwdriver.
  • The smaller screws are still the same length, but they have smaller screw heads. You can use the same screwdriver for both.
  • Using a Magnetic Mat throughout this process will help prevent losing screws.

Use the JIS #00 screwdriver to remove the 3/32" screws that secure the speaker to the body.

Remove the smaller 3/32" screws that secure the left side of the speaker with a JIS #1 screwdriver.

The smaller screws are still the same length, but they have smaller screw heads. You can use the same screwdriver for both.

Using a Magnetic Mat throughout this process will help prevent losing screws.

1024

Step 2

  • Use the Plastic Opening Tool to gently lift the speaker enough to see the connected wires.

Use the Plastic Opening Tool to gently lift the speaker enough to see the connected wires.

Step 3

  • Use a soldering iron to de-solder the two speaker wires from the speaker itself.
  • The speakers are ready to be removed and replaced.
  • Ensure that the device is turned off when handling bare wire.
  • Soldering iron is very hot.

Use a soldering iron to de-solder the two speaker wires from the speaker itself.

The speakers are ready to be removed and replaced.

Ensure that the device is turned off when handling bare wire.

Soldering iron is very hot.

To reassemble your device, follow instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    Brendan Harkreader

Member since: 09/27/2018

478 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Linn Benton Community College, Team S1-G3, Johnson Fall 2018                        

                                                  Member of Linn Benton Community College, Team S1-G3, Johnson Fall 2018 



                    LBCC-JOHNSON-F18S1G3                     


                                            4 Members                     


                                            5 Guides authored