Difficulty
Easy
Steps
3
Time Required
10 minutes
Sections
1
- Base-plate Removal
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackDOSS SoundBox
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Base-plate Removal
- Locate the four 3/32" screws on the bottom of your device.
- Using a JIS #00 screwdriver, remove the four 3/32" screws.
- After removing the screws, lift the cover off of the device.
Locate the four 3/32" screws on the bottom of your device.
Using a JIS #00 screwdriver, remove the four 3/32" screws.
After removing the screws, lift the cover off of the device.
1024
Step 2
- Using a JIS #1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.
- Using a JIS #000 screwdriver, remove the two 1/16" screws from the areas marked with an orange circle.
- Having the magnetic pad handy will be beneficial, as these screws are very small and easily lost.
Using a JIS #1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.
Using a JIS #000 screwdriver, remove the two 1/16" screws from the areas marked with an orange circle.
Having the magnetic pad handy will be beneficial, as these screws are very small and easily lost.
Step 3
- Lift the base-plate off of the enclosure.
Lift the base-plate off of the enclosure.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Brendan Harkreader
Member since: 09/27/2018
478 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Linn Benton Community College, Team S1-G3, Johnson Fall 2018
Member of Linn Benton Community College, Team S1-G3, Johnson Fall 2018
LBCC-JOHNSON-F18S1G3
4 Members
5 Guides authored