Difficulty
Moderate
Steps
5
Time Required
Suggest a time??
Sections
2
- Rear Panel
- 4 steps
- Speaker
- 1 step
Flags
1
Missed a Step
Oops! This guide is currently missing some important steps.
BackDopo Double Power 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Panel
- The rear panel is secured to the front case and can simply be pried apart without damage.
The rear panel is secured to the front case and can simply be pried apart without damage.
1024
Step 2
- Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.
Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.
Step 3
- Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.
Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.
Step 4
- The rear panel should come completely off.
The rear panel should come completely off.
Step 5
Speaker
- Using wire cutters, cut the red and black wires connected to the speaker.
- The speaker is magnetized and not permanently attached.
Using wire cutters, cut the red and black wires connected to the speaker.
The speaker is magnetized and not permanently attached.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
mike pelosi
Member since: 10/30/2015
682 Reputation
6 Guides authored
Badges:
12
+9 more badges
Team
UMass Dartmouth, Team 1-2, Miles Fall 2015
Member of UMass Dartmouth, Team 1-2, Miles Fall 2015
UMASSD-MILES-F15S1G2
4 Members
12 Guides authored
