Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

2

  • Rear Panel
  • 4 steps
  • Motherboard
  • 4 steps

Flags

3

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Missed a Step

Oops! This guide is currently missing some important steps.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDopo Double Power 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Rear Panel
  • The rear panel is secured to the front case and can simply be pried apart without damage.

The rear panel is secured to the front case and can simply be pried apart without damage.

1024

Step 2

  • Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.

Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.

Step 3

  • Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.

Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.

Step 4

  • The rear panel should come completely off.

The rear panel should come completely off.

Step 5

              Motherboard
  • Remove any static tape covering the motherboard.

Remove any static tape covering the motherboard.

Step 6

  • Using the flat end of a spudger or tweezers, remove the three cables connected to the motherboard.
  • The cables can be disconnected by lifting up on the black section of the socket, as shown by the arrow.
  • Once the lever is lifted, pull out the cable by gently tugging on it.

Using the flat end of a spudger or tweezers, remove the three cables connected to the motherboard.

The cables can be disconnected by lifting up on the black section of the socket, as shown by the arrow.

Once the lever is lifted, pull out the cable by gently tugging on it.

Step 7

  • Using a Phillips Head Screwdriver size 0, remove the four screws attaching the motherboard.

Using a Phillips Head Screwdriver size 0, remove the four screws attaching the motherboard.

Step 8

  • Using wire cutters, cut the red, black, and grays wires. Leave enough wire to be re-soldered back if possible.
  • The motherboard can now be removed

Using wire cutters, cut the red, black, and grays wires. Leave enough wire to be re-soldered back if possible.

The motherboard can now be removed

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    mike pelosi

Member since: 10/30/2015

682 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team 1-2, Miles Fall 2015                        

                                                  Member of UMass Dartmouth, Team 1-2, Miles Fall 2015 



                    UMASSD-MILES-F15S1G2                     


                                            4 Members                     


                                            12 Guides authored