Dopo Double Power 7 Camera Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 - 35 minutes            

Sections

2

• Rear Panel
• 4 steps
• Camera
• 2 steps

Flags

0

• BackDopo Double Power 7

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Panel               

• The rear panel is secured to the front case and can simply be pried apart without damage.

The rear panel is secured to the front case and can simply be pried apart without damage.

1024

Step 2

• Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.

Carefully, wedge the plastic opening tool in-between the seam that separates both halves of the tablet.

Step 3

• Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.

Run the plastic opening tool along the seam looking for the clips and lift up on the rear panel.

Step 4

• The rear panel should come completely off.

The rear panel should come completely off.

Step 5

              Camera               

• Remove any black static tape that may be covering the motherboard.

Remove any black static tape that may be covering the motherboard.

Step 6

• The camera is taped in place.
• Use the flat end of a spudger to disconnect the front-facing camera cable from its socket on the motherboard.
• Our cable had previously been cut but yours can be disconnected by lifting up on the black section of the socket, as shown by the arrow, and pulling the cable out.
• Simply, pull back the tape and remove the camera.

The camera is taped in place.

Use the flat end of a spudger to disconnect the front-facing camera cable from its socket on the motherboard.

Our cable had previously been cut but yours can be disconnected by lifting up on the black section of the socket, as shown by the arrow, and pulling the cable out.

Simply, pull back the tape and remove the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    mike pelosi                     

Member since: 10/30/2015

682 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       UMass Dartmouth, Team 1-2, Miles Fall 2015                        

                                                  Member of UMass Dartmouth, Team 1-2, Miles Fall 2015 



                    UMASSD-MILES-F15S1G2                     


                                            4 Members                     


                                            12 Guides authored