Difficulty

Moderate

Steps

5

Time Required

                          30 minutes

Sections

1

  • Speakers
  • 5 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackDOPO 10.1 Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Note: If the user is not familiar with how to solder wires, follow link provided below.

How To Solder and Desolder Connections

What you need

Step 1

              Separating the Covers
  • • Insert tool into crease between covers. First, insert one of the plastic tools between the front and back cover as shown. Next, twist the plastic tool until separation has occurred between the front and back of the tablet. Repeat this step until the user is able to fully separate the front and back covers.

• Insert tool into crease between covers. First, insert one of the plastic tools between the front and back cover as shown. Next, twist the plastic tool until separation has occurred between the front and back of the tablet. Repeat this step until the user is able to fully separate the front and back covers.

1024

Step 2

              Locate the Speakers
  • The speakers should be attached to the white cover of the tablet as shown. Follow the wires back to the mother board making sure to remove all tape attaching wires to cover along the way. This will free up the wires for easy maneuverability.

The speakers should be attached to the white cover of the tablet as shown. Follow the wires back to the mother board making sure to remove all tape attaching wires to cover along the way. This will free up the wires for easy maneuverability.

Step 3

              Clearing the Pathway to Remove Speakers
  • We will need to separate the battery from the panel slightly. This will allow for easier maneuverability to remove speakers. Do not separate the battery completely.

We will need to separate the battery from the panel slightly. This will allow for easier maneuverability to remove speakers. Do not separate the battery completely.

Step 4

              Desoldering Speakers from Tablet Motherboard
  • De-solder the red and black wires from the tablets motherboard. This will officially disconnect, and separate the defective speakers from the motherboard.

De-solder the red and black wires from the tablets motherboard. This will officially disconnect, and separate the defective speakers from the motherboard.

Step 5

              Removing Speakers
  • Remove defective speakers from their location in tablet.

Remove defective speakers from their location in tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kaitlyn Hayes

Member since: 01/21/2015

414 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 5-2, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 5-2, Brown Winter 2015 



                    USFT-BROWN-W15S5G2                     


                                            4 Members                     


                                            10 Guides authored