Difficulty

Moderate

Steps

10

Time Required

                          1 - 2 hours

Sections

1

  • Screen
  • 10 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackDOPO 10.1 Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen
  • Remove back case of tablet by taking spudger tool to lift the back plate.

Remove back case of tablet by taking spudger tool to lift the back plate.

1024

Step 2

  • With caution, unplug speakers from back case of tablet.

With caution, unplug speakers from back case of tablet.

Step 3

  • Remove battery
  • Grab and apply light pressure to battery to release it from the back
  • Place off to the side carefully. Be sure not to disconnect cables from motherboard

Remove battery

Grab and apply light pressure to battery to release it from the back

Place off to the side carefully. Be sure not to disconnect cables from motherboard

Step 4

  • Locate where the cameras are attached to motherboard
  • Now release and remove them from motherboard
  • Take camera out and place off to side

Locate where the cameras are attached to motherboard

Now release and remove them from motherboard

Take camera out and place off to side

Step 5

  • Remove motherboard
  • To do this you will have to unscrew a total of 5 .25in phillips head screws

Remove motherboard

To do this you will have to unscrew a total of 5 .25in phillips head screws

Step 6

  • Remove back metal piece.
  • Use plastic pry tool and go around the edges lightly and pop it off.

Remove back metal piece.

Use plastic pry tool and go around the edges lightly and pop it off.

Step 7

  • Using a plastic opening tool, remove the back screen pieces from the back.

Using a plastic opening tool, remove the back screen pieces from the back.

Step 8

  • Using the plastic pry tool remove metal frame.

Using the plastic pry tool remove metal frame.

Step 9

  • Take the iFixit iOpener and place it on the glue
  • This will release the glass from the plastic frame

Take the iFixit iOpener and place it on the glue

This will release the glass from the plastic frame

Step 10

  • Carefully remove glass. If glass is already broken use gloves to remove glass.

Carefully remove glass. If glass is already broken use gloves to remove glass.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Michael

Member since: 01/21/2015

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team 5-2, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 5-2, Brown Winter 2015 



                    USFT-BROWN-W15S5G2                     


                                            4 Members                     


                                            10 Guides authored