Dopo 10 1 Tablet Dual 3 Mega Pixel Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Dual .3 mega pixel Camera
4 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

BackDOPO 10.1 Tablet
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Removing Back of tablet

You will have to remove the back of the tablet. To do this, take the plastic opening tool, and insert into the side of the tablet and twist. This will pop off the side.
Slowly pull up on the cover until it is completely off.

You will have to remove the back of the tablet. To do this, take the plastic opening tool, and insert into the side of the tablet and twist. This will pop off the side.

Slowly pull up on the cover until it is completely off.

1024

Step 2

              Relocating obstructions

You may notice that the battery is in the way. No worries, it is easy to move. All you will need to do is to gently lift up on the battery with a small constant pressure to release it from the adhesive.
Carefully put it off to the side.
Once the battery is removed you will see a gray wire. Lightly lift up, and move it out of way.

You may notice that the battery is in the way. No worries, it is easy to move. All you will need to do is to gently lift up on the battery with a small constant pressure to release it from the adhesive.

Carefully put it off to the side.

Once the battery is removed you will see a gray wire. Lightly lift up, and move it out of way.

Step 3

              Removing Camera from motherboard

Locate where the camera is plugged into the motherboard. It should be on the left side of the motherboard just above the center.
Once located lift the black lever on the right side of the connector. This will release the camera.
Once the lever is lifted, pull out the camera by gently tugging the cameras connector tape.

Locate where the camera is plugged into the motherboard. It should be on the left side of the motherboard just above the center.

Once located lift the black lever on the right side of the connector. This will release the camera.

Once the lever is lifted, pull out the camera by gently tugging the cameras connector tape.

Step 4

              Removing Camera from the device

Remove yellow tape that is securing the camera to the back cover.
Now take tweezers, and gently grab one of the cameras. Once grabbed, begin to twist to remove from device. Do this for both cameras.

Remove yellow tape that is securing the camera to the back cover.

Now take tweezers, and gently grab one of the cameras. Once grabbed, begin to twist to remove from device. Do this for both cameras.

To reassemble your device, follow these instructions in reverse order.

For information you can go to http://www.doublepowertech.com/download/…

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Kaitlyn Hayes

Member since: 01/21/2015

414 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 5-2, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 5-2, Brown Winter 2015 



                    USFT-BROWN-W15S5G2                     


                                            4 Members                     


                                            10 Guides authored

Slice and Dice#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Slice and Dice

Introduction

What you need

Team