Difficulty
Moderate
Steps
9
Time Required
35 - 40 minutes
Sections
1
- Dog Bed Cushion Repair
- 9 steps
Flags
0
BackPet Supply
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
These repairs will require the use of a needle and thread. It is recommended that one reviews basic sewing before proceeding, as the procedure in this guide is not all-inclusive.
What you need
Step 1
Dog Bed Cushion Repair
- Fill the tear/hole with new stuffing until your desired thickness is achieved.
Fill the tear/hole with new stuffing until your desired thickness is achieved.
1024
Step 2
- Using the needle and thread, loosely stitch the hole or tear shut.
- Do not worry if it’s messy, a new layer of fabric will cover it later.
Using the needle and thread, loosely stitch the hole or tear shut.
Do not worry if it’s messy, a new layer of fabric will cover it later.
Step 3
- Lay the new piece of fabric flat on the table and set the dog bed on top of the fabric.
- Using a pair of fabric scissors, cut the fabric around the shape of the dog bed.
Lay the new piece of fabric flat on the table and set the dog bed on top of the fabric.
Using a pair of fabric scissors, cut the fabric around the shape of the dog bed.
Step 4
- Remove the fabric from under the dog bed and place it down with the wrong side (the side which should not be seen) facing the dog bed.
- Make sure that the the fabric covers the entire side of the dog bed cushion. Then, take a pin and fasten one corner of the fabric to the dog bed.
Remove the fabric from under the dog bed and place it down with the wrong side (the side which should not be seen) facing the dog bed.
Make sure that the the fabric covers the entire side of the dog bed cushion. Then, take a pin and fasten one corner of the fabric to the dog bed.
Step 5
- Now that the fabric has been pinned in one corner, finish pinning the same side of the fabric straight down the one side of the dog bed.
Now that the fabric has been pinned in one corner, finish pinning the same side of the fabric straight down the one side of the dog bed.
Step 6
- By hand, stitch down the entire length of the fabric that has been pinned to the bed. Try to keep the stitches the same size and with even placement. The goal is to keep the stitches looking as neat as possible.
By hand, stitch down the entire length of the fabric that has been pinned to the bed. Try to keep the stitches the same size and with even placement. The goal is to keep the stitches looking as neat as possible.
Step 7
- Stop sewing and fold the fabric over the rest of the dog bed, covering the entire cushion.
- Tuck any excess fabric around the edges of the cushion until it is neatly underneath.
Stop sewing and fold the fabric over the rest of the dog bed, covering the entire cushion.
Tuck any excess fabric around the edges of the cushion until it is neatly underneath.
Step 8
- Pin the fabric down alongside the entire diameter of the bed, following the same procedure as steps 5 and 6. Continue stitching alongside the entire bed, starting where left off.
Pin the fabric down alongside the entire diameter of the bed, following the same procedure as steps 5 and 6. Continue stitching alongside the entire bed, starting where left off.
Step 9
- The bed’s new stuffing and cover should prove both durable and comfortable.
- Place in a room of your choice for your pet to enjoy.
The bed’s new stuffing and cover should prove both durable and comfortable.
Place in a room of your choice for your pet to enjoy.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kristen Nasta
Member since: 03/29/2021
169 Reputation
1 Guide authored
Badges:
2
Team
Marist, Team S1-G1, Chaterdon Spring 2021
Member of Marist, Team S1-G1, Chaterdon Spring 2021
MARS-CHATERDON-S21S1G1
2 Members
1 Guide authored
