Dji Spark Controller Mobile Device Grip Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          35 seconds - 2 minutes            

Sections

1

• Mobile Device Grip
• 3 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackDJI Spark

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Mobile Device Grip               

• Unfold the arm.
• Extend the controller’s arm as you would before normally flying the drone.
• To avoid obstruction, make sure the screwheads of the grip are parallel to the body of the controller.

Unfold the arm.

Extend the controller’s arm as you would before normally flying the drone.

To avoid obstruction, make sure the screwheads of the grip are parallel to the body of the controller.

1024

Step 2

• Remove the grip.
• Remove two screws using a T6 torx screwdriver.
• Use this same procedure for both arms.

Remove the grip.

Remove two screws using a T6 torx screwdriver.

Use this same procedure for both arms.

Step 3

• Once both screws are removed, the grip parts come off easily.
• Be carful when doing this step because the two parts of the grip might fall once the two screws are removed.

Once both screws are removed, the grip parts come off easily.

Be carful when doing this step because the two parts of the grip might fall once the two screws are removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Amelia Hagberg                     

Member since: 10/21/2019

403 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team S1-G7, Botvin Fall 2019                        

                                                  Member of UMass Dartmouth, Team S1-G7, Botvin Fall 2019 



                    UMASSD-BOTVIN-F19S1G7                     


                                            3 Members                     


                                            7 Guides authored