Difficulty

Difficult

Steps

8

Time Required

                          10 - 15 minutes

Sections

2

  • Back Panel
  • 5 steps
  • Motherboard
  • 3 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

  • BackDJI Phantom 4 Advanced Remote Controller

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before you begin:

  • Please make sure to completely power off the the controller prior to any replacements.Please read the guide before any replacements in order to familiarize yourself with the process.

What you need

Step 1

              Back Panel
  • Remove the four screws with a Torx T8 screwdriver to access the back con board.

Remove the four screws with a Torx T8 screwdriver to access the back con board.

1024

Step 2

  • Remove three screws using a Phillips #00 screwdriver.

Remove three screws using a Phillips #00 screwdriver.

Step 3

  • With tweezers, gently remove the large con board tab.
  • Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

With tweezers, gently remove the large con board tab.

Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

Step 4

  • Peel off the rubber grips to access the screw holes.
  • Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.
  • Remove the back board and set it aside.

Peel off the rubber grips to access the screw holes.

Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.

Remove the back board and set it aside.

Step 5

  • Pull apart the back plastic panel.
  • Recommended tool for this would be the metal spudger, but not required.
  • Once the back panel is off, you will have access to the motherboard.

Pull apart the back plastic panel.

Recommended tool for this would be the metal spudger, but not required.

Once the back panel is off, you will have access to the motherboard.

Step 6

              Motherboard
  • Disconnect ribbon tabs 1,2,5,8G, and 3.
  • Remove ribbon tab by pulling gently along motherboard. Do not pull straight out.
  • Then remove the plugs

Disconnect ribbon tabs 1,2,5,8G, and 3.

Remove ribbon tab by pulling gently along motherboard. Do not pull straight out.

Then remove the plugs

Step 7

  • With the Phillips #00 screwdriver, remove the two Phillips screws.

With the Phillips #00 screwdriver, remove the two Phillips screws.

Step 8

  • Double check to make sure all tabs, plugs and screws are removed or disconnected.
  • Gently lift motherboard out of the case.

Double check to make sure all tabs, plugs and screws are removed or disconnected.

Gently lift motherboard out of the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors 


                    cade knott

Member since: 10/02/2018

451 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Linn Benton Community College, Team S1-G4, Johnson Fall 2018                        

                                                  Member of Linn Benton Community College, Team S1-G4, Johnson Fall 2018 



                    LBCC-JOHNSON-F18S1G4                     


                                            3 Members                     


                                            12 Guides authored

carl_darklife - May 17, 2019

Reply

Do you know here can i buy a main board for phantom 4 advanced remote controller?

Luke James - Aug 7, 2019

I would like to know too, can’t find one anywhere