Dji Phantom 4 Advanced Remote Controller Battery Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes            

Sections

2

• Back Panel
• 5 steps
• Battery
• 3 steps

Flags

1

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackDJI Phantom 4 Advanced Remote Controller

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

So that your enjoyment does not get ruined by a dead battery, this guide provides instructions on how to replace the battery on the DJI Phantom 4 Advanced Remote Controller.

What you need

Step 1

              Back Panel               

• Remove the four screws with a Torx T8 screwdriver to access the back con board.

Remove the four screws with a Torx T8 screwdriver to access the back con board.

1024

Step 2

• Remove three screws using a Phillips #00 screwdriver.

Remove three screws using a Phillips #00 screwdriver.

Step 3

• With tweezers, gently remove the large con board tab.
• Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

With tweezers, gently remove the large con board tab.

Use your hands to remove the two small clips. Pull out from the socket, in a horizontal direction.

Step 4

• Peel off the rubber grips to access the screw holes.
• Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.
• Remove the back board and set it aside.

Peel off the rubber grips to access the screw holes.

Make sure to save your grips and do not to get them stuck to anything, you are going to want to save the adhesive.

Remove the back board and set it aside.

Step 5

• Pull apart the back plastic panel.
• Recommended tool for this would be the metal spudger, but not required.
• Once the back panel is off, you will have access to the motherboard.

Pull apart the back plastic panel.

Recommended tool for this would be the metal spudger, but not required.

Once the back panel is off, you will have access to the motherboard.

Step 6

              Battery               

• The battery is attached to the back plastic, and is towards the bottom of the remote.
• Unplug the cord that is connected to the bottom of the main board.

The battery is attached to the back plastic, and is towards the bottom of the remote.

Unplug the cord that is connected to the bottom of the main board.

Step 7

• After the cord is unplugged, remove the battery by lifting upon the plastic cover, which the battery is attached to.

After the cord is unplugged, remove the battery by lifting upon the plastic cover, which the battery is attached to.

Step 8

• Once the cover is off you can access the battery.

Once the cover is off you can access the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 8 other contributors 

                    cade knott                     

Member since: 10/02/2018

451 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Linn Benton Community College, Team S1-G4, Johnson Fall 2018                        

                                                  Member of Linn Benton Community College, Team S1-G4, Johnson Fall 2018 



                    LBCC-JOHNSON-F18S1G4                     


                                            3 Members                     


                                            12 Guides authored                     

Rick Artman - Jul 8, 2019

Reply

Grrrrrreat Job!

Xl S - Aug 15, 2019

Reply

Wo kann ich den Akku bestellen? Danke für die Hilfe!

Xl S - Aug 23, 2019

Reply

does someone know where to buy the akku?

Matthias Meier - Sep 11, 2020

Reply

Ich habe ein Erzatz Akku eingesetzt mit den gleichen Strom Werten, beim aufladen stelle ich fest das der Akku nicht ladet..

Es blinkt bloß ( schnell) auf einer LED.

Wo kann die Ursache liegen.