Dji Phantom 2 Vision Propellers Removal Repair Guide

Difficulty

Very easy

Steps

Time Required

                          5 minutes

Sections

Battery
1 step
Propellers
3 steps

Flags

BackDJI Phantom 2 Vision+
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Note: the drone used in this guide probably looks different from yours! It’s just a custom paint job, otherwise it’s completely stock.

What you need

Step 1

              Remove the battery

Pinch the top and bottom tabs of the battery case, pull the battery straight out to remove it.
The metal connectors form a stiff mechanical connection with the battery, you will need quite a bit of force to remove the battery. Hold the Phantom Vision+ with one hand and remove the battery with the other.

Pinch the top and bottom tabs of the battery case, pull the battery straight out to remove it.

The metal connectors form a stiff mechanical connection with the battery, you will need quite a bit of force to remove the battery. Hold the Phantom Vision+ with one hand and remove the battery with the other.

1024

Step 2

              Propellers

Determine if the propellor is clockwise or counter-clockwise rotating.
Each arm is labeled with a rotation icon that shows the direction of propellor rotation.
If this icon is missing or you can’t read it, you can determine the direction of rotation by examining the propellor.
A clockwise rotating propellor pushes air down while rotating clockwise, and the opposite is true for a counter-clockwise rotating propellor, and the propellor blade slopes up in the direction of rotation.

Determine if the propellor is clockwise or counter-clockwise rotating.

Each arm is labeled with a rotation icon that shows the direction of propellor rotation.

If this icon is missing or you can’t read it, you can determine the direction of rotation by examining the propellor.

A clockwise rotating propellor pushes air down while rotating clockwise, and the opposite is true for a counter-clockwise rotating propellor, and the propellor blade slopes up in the direction of rotation.

Step 3

              Removing clockwise rotating propellers

Loosen a clockwise rotating propeller by holding the motor with one hand and spinning the propellor clockwise.
Remove the propellor.

Loosen a clockwise rotating propeller by holding the motor with one hand and spinning the propellor clockwise.

Remove the propellor.

Step 4

              Removing counter-clockwise rotating propellers

Loosen a counter-clockwise rotating propeller by holding the motor with one hand and spinning the propellor counter-clockwise.
Remove the propellor.

Loosen a counter-clockwise rotating propeller by holding the motor with one hand and spinning the propellor counter-clockwise.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors

                    David Hoyt

Member since: 04/09/2010

3,921 Reputation

                                      43 Guides authored                  



                       Badges:
                       28







                                                        +25 more badges

Team

                       Cal Poly, Team 25-89, Amido Spring 2010                        

                                                  Member of Cal Poly, Team 25-89, Amido Spring 2010 



                    CPSU-AMIDO-S10S25G89                     


                                            4 Members                     


                                            63 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team