Dji Mavic Mini Flight Preparation Repair Guide

Difficulty

Easy

Steps

Time Required

                          1 - 4 minutes

Sections

DJI Mavic Mini Flight Preparation
7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackDJI Mavic Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Have fun!

Step 1

              Remove the camera gimbal cover

Turn the rotor blades towards the battery compartment.
Grasp the cover tab with one finger, gently push it towards the camera and remove the cover.
Be careful with the gimbal and the camera as they are very sensitive.

Turn the rotor blades towards the battery compartment.

Grasp the cover tab with one finger, gently push it towards the camera and remove the cover.

Be careful with the gimbal and the camera as they are very sensitive.

1024

Step 2

              Unfold the front rotor arms

Since the front rotor arms block the rear ones, it is absolutely necessary to unfold them first.
Hold the drone with one hand and unfold the rotor arm with the other.
Fold out the front arms only towards the camera and not up or down.
Repeat the process on the other side.

Since the front rotor arms block the rear ones, it is absolutely necessary to unfold them first.

Hold the drone with one hand and unfold the rotor arm with the other.

Fold out the front arms only towards the camera and not up or down.

Repeat the process on the other side.

Step 3

              Unfold rear rotor arms

Turn the drone onto its back.
Fold out the rotor arm in an arc towards the battery compartment.
Repeat the process for the other rotor arm.

Turn the drone onto its back.

Fold out the rotor arm in an arc towards the battery compartment.

Repeat the process for the other rotor arm.

Step 4

Unfold the phone holder.
Take the joysticks out of the holder and screw them in, in a clockwise direction.

Unfold the phone holder.

Take the joysticks out of the holder and screw them in, in a clockwise direction.

Step 5

              Switch on remote control

Stecke dein Handy in die Halterung und verbinde es per Kabel mit der Fernbedienung.Put your phone in the cradle and connect it to the remote control via cable.
Make sure that Bluetooth and Wifi are enabled on your phone.
Press the On button once briefly, release it, and then press and hold until you hear a “beep” sound.
Always turn on the remote control before the drone.

Stecke dein Handy in die Halterung und verbinde es per Kabel mit der Fernbedienung.Put your phone in the cradle and connect it to the remote control via cable.

Make sure that Bluetooth and Wifi are enabled on your phone.

Press the On button once briefly, release it, and then press and hold until you hear a “beep” sound.

Always turn on the remote control before the drone.

Step 6

              Turn on drone

Before you turn on the drone, you should slide a fully charged battery into the battery compartment.
Press the button on the bottom once briefly, let go, and then hold it down until you hear a “beep”. (similar to the remote control).
Place the drone on a straight surface where it can take off.
Make sure there is a clear flight path above the drone and check your local laws governing drone flights.

Before you turn on the drone, you should slide a fully charged battery into the battery compartment.

Press the button on the bottom once briefly, let go, and then hold it down until you hear a “beep”. (similar to the remote control).

Place the drone on a straight surface where it can take off.

Make sure there is a clear flight path above the drone and check your local laws governing drone flights.

Step 7

              Connect to the drone

With both devices turned on, open the “DJI Fly” app on your phone and wait for your drone to connect, you can tell because the app will show you a live image of your Drone.
If this does not happen follow the app’s connection tutorial.
Now when the drone is connected to the remote control, you can make it go up by pressing the “start” button in the app.
Have fun flying!

With both devices turned on, open the “DJI Fly” app on your phone and wait for your drone to connect, you can tell because the app will show you a live image of your Drone.

If this does not happen follow the app’s connection tutorial.

Now when the drone is connected to the remote control, you can make it go up by pressing the “start” button in the app.

Have fun flying!

Work through the steps in reverse order to repack your drone.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

shingle

Choojoo

Author

                                      with 2 other contributors

                    Mael

Member since: 05/05/2022

175 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Member-Contributed Guide#

Introduction#

Member-Contributed Guide

Introduction