Dji Mavic Air 2 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          30 minutes - 1 hour            

Sections

1

• Motherboard
• 5 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

• BackDJI Mavic Air 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

After replacing the motherboard, you will need to calibrate your drone. Some calibration processes can be done with the DJI Fly mobile app, but for some processes, like camera gimbal calibration, you will need to use additional software.

How to calibrate the gimbal on DJI Mavic Air 2 watch this video tutorial https://youtu.be/mu03HWXplM4

What you need

Video Overview

Step 1

              Motherboard               

• Remove the six screws on the skid plate using a H1.5 Allen Bit.

Remove the six screws on the skid plate using a H1.5 Allen Bit.

1024

Step 2

• Using the iFixIt Opening Tool, slide the tool under the skid plate and carefully lift it off the drone.

Using the iFixIt Opening Tool, slide the tool under the skid plate and carefully lift it off the drone.

Step 3

• Using the Phillips #000 screwdriver, remove the four screws holding the plastic cover and carefully remove it.

Using the Phillips #000 screwdriver, remove the four screws holding the plastic cover and carefully remove it.

Step 4

• With the motherboard exposed, use the Phillips #000 screwdriver to remove each screw on the face of the motherboard.
• In addition, unplug all of the connectors attached to the motherboard.

With the motherboard exposed, use the Phillips #000 screwdriver to remove each screw on the face of the motherboard.

In addition, unplug all of the connectors attached to the motherboard.

Step 5

• Use the opening tool to lift the motherboard out of the drone.

Use the opening tool to lift the motherboard out of the drone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Troy Ventura                     

Member since: 03/28/2022

301 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       UMass Dartmouth, Team M-1, Gurgel Spring 2022                        

                                                  Member of UMass Dartmouth, Team M-1, Gurgel Spring 2022 



                    UMASSD-GURGEL-S22SMG1                     


                                            3 Members                     


                                            2 Guides authored