Dji Mavic 3 Gimbal Calibration Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          25 - 30 minutes            

Sections

1

• DJI Mavic 3 Gimbal Calibration
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackDJI Mavic 3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

After replacing the motherboard or gimbal camera, you need to calibrate the drone. How to calibrate the DJI Mavic 3, watch this manual.

Video Overview

Step 1

              Download Programs               

• Download Programs for Calibration Gimbal Python: https://www.python.org/
• PySerial: https://pypi.org/project/pyserial/#files
• GitHub: https://github.com/o-gs/dji-firmware-too…
• 7-zip: https://7-zip.org/

Download Programs for Calibration Gimbal Python: https://www.python.org/

PySerial: https://pypi.org/project/pyserial/#files

GitHub: https://github.com/o-gs/dji-firmware-too…

7-zip: https://7-zip.org/

1024

Step 2

              First script to run calibration               

• First script to run calibration
• py comm_og_service_tool.py –port com pcode GimbalCalib JointCoarse

First script to run calibration

py comm_og_service_tool.py –port com pcode GimbalCalib JointCoarse

Step 3

              Second script for gimbal calibration               

• Second gimbal calibration script
• py comm_og_service_tool.py –port com pcode GimbalCalib LinearHall

Second gimbal calibration script

py comm_og_service_tool.py –port com pcode GimbalCalib LinearHall

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Arty                     

Member since: 10/27/2019

13,670 Reputation

                                      85 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges                           

gregory noel - Sep 13, 2022

Reply

pour le mavic 3 wm260 impossible de trouvez le –port com ne marche pas.

Arty - Sep 14, 2022

If your PC does not detect your drone in the device manager, most likely your PC did not find drivers for your drone, download and install DJI Assistant for your drone model.

Daniel Carpenter - Sep 19, 2022

Reply

Will this work on the Mavic 3?

Bashir Kapitene - Oct 18, 2022

Reply

Good Video but on Mavic 3 port com doesn’t displayed even when DJI Assistant 2 for Mavic 3 is installed

Arty - Oct 18, 2022

Waiting for software update