Difficulty

Moderate

Steps

7

Time Required

                          30 minutes            

Sections

1

  • Brake pads
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackBicycles

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Brake pads               
  • Disconnect the hub dynamo connector

Disconnect the hub dynamo connector

1024

Step 2

              Remove the front wheel               
  • Loosen the clamping screw with 4mm Allen key / Allen and remove the front wheel from the fork.

Loosen the clamping screw with 4mm Allen key / Allen and remove the front wheel from the fork.

Step 3

              Pull out the cotter pin               
  • Press the cotter pin together with the pointed pliers at the ends and pull out.

Press the cotter pin together with the pointed pliers at the ends and pull out.

Step 4

              Remove brake pads               
  • Push the squeaky brake pads out with the needle nose pliers. (For heavily worn brake pads, push the brake pistons outwards).

Push the squeaky brake pads out with the needle nose pliers. (For heavily worn brake pads, push the brake pistons outwards).

Step 5

              Insert new brake pads               
  • Insert the new brake pads together with the spring into the caliper.

Insert the new brake pads together with the spring into the caliper.

Step 6

              Insert safety pin               
  • Insert the new split pin and gently press the ends apart with the needle nose pliers.

Insert the new split pin and gently press the ends apart with the needle nose pliers.

Step 7

              Install front wheel               
  • Insert the front wheel into the fork and tighten the axle bolt with the 4mm Allen key / Allen key.
  • Test concentricity and dynamo.

Insert the front wheel into the fork and tighten the axle bolt with the 4mm Allen key / Allen key.

Test concentricity and dynamo.

Repeat the steps in order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        irlanda is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

Author

                                      with 1 other contributor 

                    Froebel Christian                     

Member since: 02/02/2016

420 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,767 Guides authored