Difficulty

Easy

Steps

6

Time Required

                          15 - 30 minutes

Sections

1

  • Phone
  • 6 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackZTE Racer II

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Phone
  • Carefully prise the back cover off the phone.

Carefully prise the back cover off the phone.

1024

Step 2

  • Remove Battery, SIM Card, and MicroSD
  • Remove the four screws located around the edge of the case. They should be very small phillips heads.

Remove Battery, SIM Card, and MicroSD

Remove the four screws located around the edge of the case. They should be very small phillips heads.

Step 3

  • Using a flathead screwdriver, carefully prise the black plastic away. It’s held in with a series of clips, and should come away easily.

Using a flathead screwdriver, carefully prise the black plastic away. It’s held in with a series of clips, and should come away easily.

Step 4

  • Carefully remove the ribbon cable that connects the capacitive screen to the main board. You need to carefully lift the small tab, then pull the cable out.

Carefully remove the ribbon cable that connects the capacitive screen to the main board. You need to carefully lift the small tab, then pull the cable out.

Step 5

  • Now using the flathead screwdriver, prise the plastic that makes up the front, away from the circuit board. Like the back piece, it has a series of clips around the edge, and should lift free without much effort.

Now using the flathead screwdriver, prise the plastic that makes up the front, away from the circuit board. Like the back piece, it has a series of clips around the edge, and should lift free without much effort.

Step 6

  • There you have it. Amazingly simple to take apart this phone.

There you have it. Amazingly simple to take apart this phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Jacob

Member since: 04/27/2013

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge