Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

2

  • Batteries
  • 3 steps
  • Faceplate
  • 5 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackYamaha YPG-225

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Batteries
  • Turn the keyboard over so that the keys are facing the ground.

Turn the keyboard over so that the keys are facing the ground.

1024

Step 2

  • Pop the tabs on the battery casing and remove it from the back plate.

Pop the tabs on the battery casing and remove it from the back plate.

Step 3

  • Locate the six batteries and remove them from the battery cavity.

Locate the six batteries and remove them from the battery cavity.

Step 4

              Faceplate
  • Remove the six 10mm screws at the top of the backplate.

Remove the six 10mm screws at the top of the backplate.

Step 5

  • Remove the seven 12mm screws in the middle of the back plate.

Remove the seven 12mm screws in the middle of the back plate.

Step 6

  • Remove the eight 10mm screws from the side and the bottom of the back plate.

Remove the eight 10mm screws from the side and the bottom of the back plate.

Step 7

  • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.
  • Flip over the keyboard.

As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

Flip over the keyboard.

Step 8

  • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.
  • Be careful when removing the face plate. There are wires attached.

Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

Be careful when removing the face plate. There are wires attached.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Lonnie Bissmeyer

Member since: 09/16/2012

427 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 2-62, Propen Fall 2012                        

                                                  Member of Cal Poly, Team 2-62, Propen Fall 2012 



                    CPSU-PROPEN-F12S2G62                     


                                            2 Members                     


                                            6 Guides authored