Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
1
- HDD Removal
- 5 steps
Flags
3
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackDynabook (Toshiba) Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
HDD Removal
- Pry up cover, remove screw.
Pry up cover, remove screw.
1024
Step 2
- Remove screws.
Remove screws.
Step 3
- Gently pry out to unsnap top plastic housing.
Gently pry out to unsnap top plastic housing.
Step 4
- Lift keyboard and flip over, but do not remove, it is still attached by ribbon cable.
- Slide back connector tabs to release ribbon cable.
- Remove 5 screws and lift out plate to access HDD and FDD.
Lift keyboard and flip over, but do not remove, it is still attached by ribbon cable.
Slide back connector tabs to release ribbon cable.
Remove 5 screws and lift out plate to access HDD and FDD.
Step 5
- To remove HDD loosen tape, lift out BIOS battery, remove screws and slide back HDD housing.
To remove HDD loosen tape, lift out BIOS battery, remove screws and slide back HDD housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
WayneG
Member since: 05/13/2013
191 Reputation
1 Guide authored
Badges:
5
+2 more badges