Difficulty

Easy

Steps

3

Time Required

                          5 minutes

Sections

1

  • Front Cover
  • 3 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackToshiba A1304T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If you can’t get a hold of a Torx 6 Security Screwdriver, a small flathead can be used as a substitute

What you need

Step 1

              Front Cover
  • Open the phone so that it matches the photos to the left.
  • Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

Open the phone so that it matches the photos to the left.

Using a thumb-tack, push-pin, or similar pin, remove the four plastic stoppers located around the main LCD screen.

1024

Step 2

  • With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.
  • The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

With the T8 Torx Security Bit Screwdriver, remove the four screws in the designated locations.

The T8 Torx Security Bit Screwdriver can be substituted with a small flathead screwdriver. Screw removal may be slightly more difficult however.

Step 3

  • Insert the head of a flathead screwdriver into the seam between the front cover and the phone.
  • Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.
  • Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

Insert the head of a flathead screwdriver into the seam between the front cover and the phone.

Pry gently until the cover gives slightly to create a slightly wider opening. You may hear a distinct pop as you pry.

Remove the screwdriver and re-insert it into another portion of the seam. Continue making gaps around the cover of the phone until it is completely detached from the body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Christopher

Member since: 04/22/2010

90 Reputation

                                      8 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 16-6, Maness Spring 2010                        

                                                  Member of Cal Poly, Team 16-6, Maness Spring 2010 



                    CPSU-MANESS-S10S16G6                     


                                            4 Members                     


                                            16 Guides authored