Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes

Sections

1

  • Record Player
  • 6 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackTeac DC-D2831

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Record Player
  • Make sure the device is turned off and unplugged. This will eliminate the danger of getting electrocuted while repairing the device.

Make sure the device is turned off and unplugged. This will eliminate the danger of getting electrocuted while repairing the device.

1024

Step 2

  • Lift the lid to get to the turntable.
  • Using the appropriate tools (needle-nose pliers, tweezers, screwdriver, etc.), remove the snap ring from the center of the turntable. The snap-ring is the small metal ring around the axel of the turntable.
  • The snap-ring is hard to remove so be patient and don’t be afraid to use some force.
  • Feel free to use whatever tool(s) that will remove the snap-ring. The above list of tools are just a suggestions.

Lift the lid to get to the turntable.

Using the appropriate tools (needle-nose pliers, tweezers, screwdriver, etc.), remove the snap ring from the center of the turntable. The snap-ring is the small metal ring around the axel of the turntable.

The snap-ring is hard to remove so be patient and don’t be afraid to use some force.

Feel free to use whatever tool(s) that will remove the snap-ring. The above list of tools are just a suggestions.

Step 3

  • Once the snap ring is removed, gently lift the turntable from the rest of the device.
  • If the device has a faulty belt, see the belt repair guide here: Belt Repair Guide
  • If it does not, continue with the disassembly.

Once the snap ring is removed, gently lift the turntable from the rest of the device.

If the device has a faulty belt, see the belt repair guide here: Belt Repair Guide

If it does not, continue with the disassembly.

Step 4

  • Remove the screws on the side of the device using a Phillips 2 screwdriver.
  • When removing the screws, take note of which screws go where.
  • 27.0mm
  • 19.8mm
  • 15.9mm
  • 12.0mm

Remove the screws on the side of the device using a Phillips 2 screwdriver.

When removing the screws, take note of which screws go where.

27.0mm

19.8mm

15.9mm

12.0mm

Step 5

  • Lift the base that the turntable was resting on from the rest of the device.
  • Remove the base slowly so to not sever the connection with the wire attached from the base to the circuit board.

Lift the base that the turntable was resting on from the rest of the device.

Remove the base slowly so to not sever the connection with the wire attached from the base to the circuit board.

Step 6

  • If the device is having motor issues, continue here: Motor Repair Guide
  • If the device is having issues with the display, continue here: Volume Control Knob

If the device is having motor issues, continue here: Motor Repair Guide

If the device is having issues with the display, continue here: Volume Control Knob

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Jake Hamilton

Member since: 09/19/2012

134 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 2-61, Propen Fall 2012                        

                                                  Member of Cal Poly, Team 2-61, Propen Fall 2012 



                    CPSU-PROPEN-F12S2G61                     


                                            4 Members                     


                                            5 Guides authored

jfranklinhamm - Dec 9, 2015

Reply

How to remove lid from CD-D2831

Joanna Chavez - Jun 17, 2020

Reply

So radio sound and tape work and sound is great. However when turn table is on the sound is low only on that component any help would be greatly appreciated