Disassembling The Nokia 6300 Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Phone
6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackNokia 6300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Cover

Take off the back cover by pushing it down and sliding it backwards.

Take off the back cover by pushing it down and sliding it backwards.

1024

Step 2

Take out the battery, SIM card, and MicroSD card.
Unscrew the two T6 Torx screws.

Take out the battery, SIM card, and MicroSD card.

Unscrew the two T6 Torx screws.

Step 3

Try to seperate the front cover from the rest of the phone. The front cover is held by four plastic clips.
The first time you do this you may have to use some force but do it in a controlled way. If you break the plastic clips you’ll need a new front cover.

Try to seperate the front cover from the rest of the phone. The front cover is held by four plastic clips.

The first time you do this you may have to use some force but do it in a controlled way. If you break the plastic clips you’ll need a new front cover.

Step 4

You can take off the keypad now, this is sitting loose on top of the sensors.
Unscrew the four remaining T6 Torx screws.
The screws holding the motherboard in place are different from the two previous screws which held the rear cover in place.

You can take off the keypad now, this is sitting loose on top of the sensors.

Unscrew the four remaining T6 Torx screws.

The screws holding the motherboard in place are different from the two previous screws which held the rear cover in place.

Step 5

The motherboard with it’s screen are now loose, you can pop it right out.
If you’ve been using this phone for a while, there’s probably some dust inside the back shell.
There’s a lot of contacts exposed, so make sure not to damage those.

The motherboard with it’s screen are now loose, you can pop it right out.

If you’ve been using this phone for a while, there’s probably some dust inside the back shell.

There’s a lot of contacts exposed, so make sure not to damage those.

Step 6

There’s your phone!

There’s your phone!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      20 other people completed this guide.

Author

                                      with 4 other contributors

                    LucasJV

Member since: 05/18/2010

735 Reputation

                                      3 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       Verheij.co                        

                                                  Member of Verheij.co 



                    Business                     


                                            1 Member                     


                                            5 Guides authored

abhishek - Sep 13, 2016

in this where is bluetooth module plzz give me ans @ bhatia.abhi98@gmail.com

Member-Contributed Guide#

Introduction#

What you need#

Team#

Member-Contributed Guide

Introduction

What you need

Team