Disassembling Sony Reader Touch Edition Prs 600 Side And Bottom Panel Repair Guide

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

3

• Back Panel
• 3 steps
• Power Button
• 2 steps
• Side and Bottom Panel
• 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSony Reader Touch Edition PRS-600

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Panel               

• Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

Using the Phillips head screwdriver PH000, remove the two 1.4 mm screws that are located on the backside of the device.

1024

Step 2

• Slide the back cover off by pushing it to the left, away from the side that held the screws.
• Remove the cover.

Slide the back cover off by pushing it to the left, away from the side that held the screws.

Remove the cover.

Step 3

• This is what the device should look like once the back cover panel has been removed.

This is what the device should look like once the back cover panel has been removed.

Step 4

              Power Button               

• Remove the stylus from the device.

Remove the stylus from the device.

Step 5

• Using the Phillips screwdriver remove the 1.4 mm screw from the top panel.
• Using the same screwdriver, remove the 1.4 mm screw from the back of the device.
• Pry apart off the top panel of the device.

Using the Phillips screwdriver remove the 1.4 mm screw from the top panel.

Using the same screwdriver, remove the 1.4 mm screw from the back of the device.

Pry apart off the top panel of the device.

Step 6

              Side and Bottom Panel               

• Using a Phillips head screwdriver, remove the two 1.4 mm screws from the bottom panel of the device.
• Using the same screwdriver, remove the 1.4 mm screw that is located on the back of the device.

Using a Phillips head screwdriver, remove the two 1.4 mm screws from the bottom panel of the device.

Using the same screwdriver, remove the 1.4 mm screw that is located on the back of the device.

Step 7

• Pull the panel away from the device. You may have to use the flat end of the spudger to remove the side portion of the panel because it will be glued in place.

Pull the panel away from the device. You may have to use the flat end of the spudger to remove the side portion of the panel because it will be glued in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Zachary Jeffers                     

Member since: 10/13/2014

412 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Clemson, Team 1-4, Benson Fall 2014                        

                                                  Member of Clemson, Team 1-4, Benson Fall 2014 



                    CLEM-BENSON-F14S1G4                     


                                            4 Members                     


                                            22 Guides authored