Difficulty

Easy

Steps

13

Time Required

                          15 - 30 minutes

Sections

1

  • Disassembling Sony Ericsson T68i
  • 13 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackSony Ericsson T68i

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Sony Ericsson T68i
  • Remove the battery from the back.

Remove the battery from the back.

1024

Step 2

  • Remove the plastic cover from the back. Pry it off from the top first with a thin plastic shim, then remove it from the two bottom clips.
  • When removing the top part do not bend it too far down, or else you risk breaking the two bottom clips.

Remove the plastic cover from the back. Pry it off from the top first with a thin plastic shim, then remove it from the two bottom clips.

When removing the top part do not bend it too far down, or else you risk breaking the two bottom clips.

Step 3

  • Unscrew all four Torx T6 screws.
  • Keep in a safe place.

Unscrew all four Torx T6 screws.

Keep in a safe place.

Step 4

  • After removing the screws, the two halves will separate. If not, then pry them gently apart.

After removing the screws, the two halves will separate. If not, then pry them gently apart.

Step 5

  • Pull off the keypad.

Pull off the keypad.

Step 6

  • Gently pull off the infra red window and the vibra motor.

Gently pull off the infra red window and the vibra motor.

Step 7

  • Remove the circuit board and screen from the device.
  • Use your T6 to remove the 4 screws holding the cover on.

Remove the circuit board and screen from the device.

Use your T6 to remove the 4 screws holding the cover on.

Step 8

  • Remove the board and screen.

Remove the board and screen.

Step 9

  • Lever out the microphone using a small screwdriver or any similar tool.

Lever out the microphone using a small screwdriver or any similar tool.

Step 10

  • Carefully remove the plastic clips holding the screen on the board.

Carefully remove the plastic clips holding the screen on the board.

Step 11

  • Remove the speaker located in the screen housing just above the screen.
  • Gently pry it out with a small screwdriver or similar tool.

Remove the speaker located in the screen housing just above the screen.

Gently pry it out with a small screwdriver or similar tool.

Step 12

  • Remove the plate from the circuit board protecting the more delicate processing parts.

Remove the plate from the circuit board protecting the more delicate processing parts.

Step 13

  • Congratulations, you have successfully disassembled your Sony Ericsson T68i!

Congratulations, you have successfully disassembled your Sony Ericsson T68i!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 5 other contributors 


                    Tim Dascomb

Member since: 04/13/2010

159 Reputation

                                      7 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 26-34, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 26-34, Regan Spring 2010 



                    CPSU-REGAN-S10S26G34                     


                                            4 Members                     


                                            13 Guides authored