Difficulty
Very easy
Steps
3
Time Required
1 - 2 minutes
Sections
1
- The Case
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony Clié PEG-NR70
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
The Case
- Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.
- It may be helpful to set up a piece of paper to keep track of where removed screws came from.
Unscrew the 1.9mm screw located at the top of the device with a Phillips #00 screwdriver.
It may be helpful to set up a piece of paper to keep track of where removed screws came from.
1024
Step 2
- Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.
Unscrew the 2.5mm screw located on the left side of the device with a Phillips #00 screwdriver.
Step 3
- Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.
- Remove the back panel by lifting it away with your hands.
Unscrew the five 2.5mm screws on the back panel with a Phillips #00 screwdriver.
Remove the back panel by lifting it away with your hands.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Daniel Soski
Member since: 04/18/2013
51 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 14-11, Maness Spring 2013
Member of Cal Poly, Team 14-11, Maness Spring 2013
CPSU-MANESS-S13S14G11
5 Members
8 Guides authored
