Disassembling Sony Action Cam Hdr As15 Circuit Board Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

2

• Battery
• 2 steps
• Disassembling Sony Action Cam HDR-AS15 Circuit Board
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSony Action Cam HDR-AS15

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• To access the battery, gently pry open the rear cover of the action cam.

To access the battery, gently pry open the rear cover of the action cam.

1024

Step 2

• Using a pair of tweezers, firmly grip the protrusion where the PULL signifies and remove the tray and battery.

Using a pair of tweezers, firmly grip the protrusion where the PULL signifies and remove the tray and battery.

Step 3

              Disassembling Sony Action Cam HDR-AS15 Circuit Board               

• Open the bottom tab with your finger or a plastic opening tool.
• Pull the tab out, not up, to remove it completely.
• Remove the two screws from the device.
• Use your fingers to remove the plastic plate.

Open the bottom tab with your finger or a plastic opening tool.

Pull the tab out, not up, to remove it completely.

Remove the two screws from the device.

Use your fingers to remove the plastic plate.

Step 4

• Separate the outer casing from the electronics by pushing on one of the ports toward the back end of the case. The electronics should slide right out.

Separate the outer casing from the electronics by pushing on one of the ports toward the back end of the case. The electronics should slide right out.

Step 5

• Remove the two 6.4 mm screws on the LCD side of the device using a Phillips #00 screwdriver.
• Flip the LCD display downward to reveal the circuit board.

Remove the two 6.4 mm screws on the LCD side of the device using a Phillips #00 screwdriver.

Flip the LCD display downward to reveal the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Scott Scarpinato                     

Member since: 01/06/2015

185 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team 1-2, Sullivan Winter 2015                        

                                                  Member of USF Tampa, Team 1-2, Sullivan Winter 2015 



                    USFT-SULLIVAN-W15S1G2                     


                                            4 Members                     


                                            12 Guides authored