Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
3
- Front Cover
- 3 steps
- Circuit Board
- 3 steps
- Internal Antenna
- 2 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSirius Stiletto 100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Front Cover
- Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.
Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.
1024
Step 2
- Use a Philip’s head screw driver to remove the screws from the case.
- Place the screws in a small container to avoid losing them.
Use a Philip’s head screw driver to remove the screws from the case.
Place the screws in a small container to avoid losing them.
Step 3
- Remove the front cover.
- First, insert a small pry bar where the black front cover and white back cover meet.
- Begin prying the black plastic up, slowing moving around to the bottom and other side.
- At an angle, carefully pull up on the front cover separate the two pieces.
- Excellent! Now you have removed the front cover!
Remove the front cover.
First, insert a small pry bar where the black front cover and white back cover meet.
Begin prying the black plastic up, slowing moving around to the bottom and other side.
At an angle, carefully pull up on the front cover separate the two pieces.
Excellent! Now you have removed the front cover!
Step 4
Circuit Board
- While looking down at the device, place your index finger at the top of the circuit board and your thumb on the device screen.
While looking down at the device, place your index finger at the top of the circuit board and your thumb on the device screen.
Step 5
- Using your fingers, gently pull the top of the circuit board up toward you while also sliding the bottom of the circuit board away from the bottom of the Sirius Stiletto 100 back cover.
Using your fingers, gently pull the top of the circuit board up toward you while also sliding the bottom of the circuit board away from the bottom of the Sirius Stiletto 100 back cover.
Step 6
- Congratulations! You have successfully removed the internal circuit board from the Sirius Stiletto 100 back cover.
Congratulations! You have successfully removed the internal circuit board from the Sirius Stiletto 100 back cover.
Step 7
Internal Antenna
- Flip the circuit board over to look at the back side, so that LCD screen is facing away from you.
- Use a Phillip’s head screwdriver to remove the screw from the back of the internal antenna.
Flip the circuit board over to look at the back side, so that LCD screen is facing away from you.
Use a Phillip’s head screwdriver to remove the screw from the back of the internal antenna.
Step 8
- Use your fingers to pry the internal antenna off of the circuit board. You may need to wiggle it back and forth to successfully remove it.
- Woohoo! You have removed the internal antenna!
Use your fingers to pry the internal antenna off of the circuit board. You may need to wiggle it back and forth to successfully remove it.
Woohoo! You have removed the internal antenna!
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Trey
Member since: 03/09/2012
80 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
Clemson, Team 2-1, Benson Spring 2012
Member of Clemson, Team 2-1, Benson Spring 2012
CLEM-BENSON-S12S2G1
3 Members
6 Guides authored
