Disassembling Siemens A56 Motherboard Metal Frame Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Front Plate
1 step
Back Plastic Cover
2 steps
Motherboard Metal Frame
1 step

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackSiemens A56
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Front Plate

Firmly grasp the white casing of the phone with one hand and the blue cover with the other hand as seen in the first picture.
Pull up on the two plastic clips at the top of the phone.
While the clips are pulled up, pull the blue cover away from the white casing to remove it.

Firmly grasp the white casing of the phone with one hand and the blue cover with the other hand as seen in the first picture.

Pull up on the two plastic clips at the top of the phone.

While the clips are pulled up, pull the blue cover away from the white casing to remove it.

1024

Step 2

              Back Plastic Cover

Along the side of the metal frame of the phone, locate the six screws.
Using a T5 screwdriver bit, unscrew the six 1/4 inch screws and store them in a safe place.
The screws are very small and can strip easily, so proper care is required when removing and storing the screws.

Along the side of the metal frame of the phone, locate the six screws.

Using a T5 screwdriver bit, unscrew the six 1/4 inch screws and store them in a safe place.

The screws are very small and can strip easily, so proper care is required when removing and storing the screws.

Step 3

To remove the back plastic cover, grasp the device with both hands as seen in the first picture.
Gently remove the motherboard from the back plastic cover.
The motherboard is fragile, so proper care is necessary when handling and storing in order to prevent damage.

To remove the back plastic cover, grasp the device with both hands as seen in the first picture.

Gently remove the motherboard from the back plastic cover.

The motherboard is fragile, so proper care is necessary when handling and storing in order to prevent damage.

Step 4

              Motherboard Metal Frame

Turn over the keypad interface and using the blue plastic opening tool, gently pry the bottom of the metal frame.
Once loosened, the metal frame should be able to be lifted from the motherboard.

Turn over the keypad interface and using the blue plastic opening tool, gently pry the bottom of the metal frame.

Once loosened, the metal frame should be able to be lifted from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Joseph Casey

Member since: 03/26/2014

409 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Clemson, Team 6-6, Benson Spring 2014                        

                                                  Member of Clemson, Team 6-6, Benson Spring 2014 



                    CLEM-BENSON-S14S6G6                     


                                            4 Members                     


                                            18 Guides authored

Better Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Better Introduction

What you need

Team