Difficulty
Very easy
Steps
7
Time Required
2 minutes
Sections
2
- The Back Cover
- 3 steps
- The Front Cover
- 4 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung TFT Color YP-T7J Device Page
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
The Back Cover
- Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
1024
Step 2
- Remove the screw on each side of the device using a Phillips head screwdriver.
Remove the screw on each side of the device using a Phillips head screwdriver.
Step 3
- Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.
- Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.
Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
Step 4
The Front Cover
- Using the philips screwdriver, remove the two screws on the mother board.
Using the philips screwdriver, remove the two screws on the mother board.
Step 5
- Place the pry tool in-between the front cover and mother board.
- Gently separate the front cover.
Place the pry tool in-between the front cover and mother board.
Gently separate the front cover.
Step 6
- After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.
After opening the front cover you will see and electric ribbon connecting the buttons to the mother board.
Step 7
- CAUTION: Do not rip the electric ribbon from the mother board.
- Carefully flip up the plastic lip that holds the electric ribbon to the board.
CAUTION: Do not rip the electric ribbon from the mother board.
Carefully flip up the plastic lip that holds the electric ribbon to the board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Jason Farr
Member since: 10/21/2013
353 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Clemson, Team 14-8, Benson Fall 2013
Member of Clemson, Team 14-8, Benson Fall 2013
CLEM-BENSON-F13S14G8
3 Members
7 Guides authored
