Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
1
- Disassembling Samsung HMX-W300
- 5 steps
Flags
0
BackSamsung HMX-W300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disassembling Samsung HMX-W300
- To remove the wristband of the device, grab the middle loop and pull the band through.
To remove the wristband of the device, grab the middle loop and pull the band through.
1024
Step 2
- Remove four screws with a Hex 1.5 mm screwdriver.
Remove four screws with a Hex 1.5 mm screwdriver.
Step 3
- Open the HDMI door on the side of the camera.
- Remove the single screw using a Phillips #00 screwdriver.
Open the HDMI door on the side of the camera.
Remove the single screw using a Phillips #00 screwdriver.
Step 4
- Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.
- Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.
Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.
Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.
Step 5
- Pull the wire ribbon out with a pair of tweezers.
Pull the wire ribbon out with a pair of tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 7 other contributors
Robert
Member since: 01/21/2015
966 Reputation
8 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 9-2, Blackwell Winter 2015
Member of USF Tampa, Team 9-2, Blackwell Winter 2015
USFT-BLACKWELL-W15S9G2
4 Members
16 Guides authored