Disassembling Samsung Gear 2 Front Half And Back Half Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Front half and Back half
3 steps

Flags

BackSamsung Gear 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front half and Back half

Before disassembling your Gear, be sure it is powered off.
To remove each strap, locate the metal latches on both sides of the back of the Gear.
Press down on the metal latch while pulling the strap away from the Gear until it is completely off.

Before disassembling your Gear, be sure it is powered off.

To remove each strap, locate the metal latches on both sides of the back of the Gear.

Press down on the metal latch while pulling the strap away from the Gear until it is completely off.

1024

Step 2

Remove the four 4.0 mm screws on the back of the Gear using a T5 Torx Screwdriver.

Remove the four 4.0 mm screws on the back of the Gear using a T5 Torx Screwdriver.

Step 3

Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. Move the spudger along the sides of the Gear to completely detach the back and front components.
Pry the device open from the other side also if it does not fully disassemble from one side.

Firmly holding the Gear, insert the flat side of the spudger at an angle to pry the back casing off of the device. Move the spudger along the sides of the Gear to completely detach the back and front components.

Pry the device open from the other side also if it does not fully disassemble from one side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 5 other contributors

                    Jonathan Molina

Member since: 04/14/2014

1,018 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 13-27, Maness Spring 2014                        

                                                  Member of Cal Poly, Team 13-27, Maness Spring 2014 



                    CPSU-MANESS-S14S13G27                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team