Disassembling Rival 16131 Toaster Shell Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Disassembling Rival 16131 Toaster Shell
4 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

BackRival 16131 Toaster
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

To inspect, repair or replace any internal parts, including the heating elements, you will need to disassemble the toaster.

Here is a complete guide with a detailed description, steps and pictures to facilitate you on how to disassemble the Rival 16131 Toaster Shell.

What you need

Step 1

              Disassembling Rival 16131 Toaster Shell

Make sure the toaster is unplugged before dissembling.
Turn the toaster over and remove the rubber bumper feet.

Make sure the toaster is unplugged before dissembling.

Turn the toaster over and remove the rubber bumper feet.

1024

Step 2

Use a Phillips head screwdriver to remove all four 12 mm screws that are attached to the toaster shell.

Use a Phillips head screwdriver to remove all four 12 mm screws that are attached to the toaster shell.

Step 3

With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.
When reassembling the toaster, make sure that the back of the dial lines up with the slot, both in position and orientation (the dial and slot are not perfect circles - they have a notch).
The only object holding the shell onto the toaster now is the grey part of the lever.

With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.

When reassembling the toaster, make sure that the back of the dial lines up with the slot, both in position and orientation (the dial and slot are not perfect circles - they have a notch).

The only object holding the shell onto the toaster now is the grey part of the lever.

Step 4

Reach into the shell and grab the back white part of the lever.
Hold the grey lever with both your index finger and middle finger. Next, pull it.
Pulling too hard will break the mechanism that holds the grey handle onto the white lever.
Next, remove the shell.

Reach into the shell and grab the back white part of the lever.

Hold the grey lever with both your index finger and middle finger. Next, pull it.

Pulling too hard will break the mechanism that holds the grey handle onto the white lever.

Next, remove the shell.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 11 other contributors

                    Naomi Willis

Member since: 09/26/2012

80 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 2-8, Propen Fall 2012                        

                                                  Member of Cal Poly, Team 2-8, Propen Fall 2012 



                    CPSU-PROPEN-F12S2G8                     


                                            5 Members                     


                                            6 Guides authored

Needs More Images#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Needs More Images

Introduction

What you need

Team