Difficulty
Moderate
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Disassembling RCA CC310 Left Cover
- 4 steps
Flags
0
BackRCA CC310
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disassembling RCA CC310 Left Cover
- Remove the six 7.9mm Phillips #0 screws on the back and bottom.
- Remove the one 3.8mm Phillips #0 screw on the bottom.
- Remove the two 7.5mm Phillips #0 screws on the back and bottom.
Remove the six 7.9mm Phillips #0 screws on the back and bottom.
Remove the one 3.8mm Phillips #0 screw on the bottom.
Remove the two 7.5mm Phillips #0 screws on the back and bottom.
1024
Step 2
- Remove 5.8mm Phillips #1 screw from the side button panel.
- Slide the viewfinder all the way to the right and remove the 7.9mm Phillips #0 screw.
Remove 5.8mm Phillips #1 screw from the side button panel.
Slide the viewfinder all the way to the right and remove the 7.9mm Phillips #0 screw.
Step 3
- Pry along the seam on the top side near the buttons with a spudger.
Pry along the seam on the top side near the buttons with a spudger.
Step 4
- Pull the left panel away from the rest of the camcorder.
- Unplug the red speaker cable located at the rear of the device.
- Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.
Pull the left panel away from the rest of the camcorder.
Unplug the red speaker cable located at the rear of the device.
Be careful to not pull too hard. The speaker cable is still connected to the panel and it can rip.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Ashley Katchadourian
Member since: 01/20/2011
133 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 5-20, Amido Winter 2011
Member of Cal Poly, Team 5-20, Amido Winter 2011
CPSU-AMIDO-W11S5G20
4 Members
7 Guides authored