Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
- Battery
- 1 step
- Rear Backing
- 1 step
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackQualcomm QCP-2760
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unscrew the back battery plate from the phone using a T6 Torx screwdriver.
- The screw does not need to be removed completely, the back battery plate will unhinge from the phone.
Unscrew the back battery plate from the phone using a T6 Torx screwdriver.
The screw does not need to be removed completely, the back battery plate will unhinge from the phone.
1024
Step 2
Rear Backing
- Using the T6 Torx screwdriver, remove the two screws located at the bottom of the back of the phone.
- Find the seam between the front and back of the phone
- Pry the seam open using a plastic opening tool, or your fingers.
- Some force is required
Using the T6 Torx screwdriver, remove the two screws located at the bottom of the back of the phone.
Find the seam between the front and back of the phone
Pry the seam open using a plastic opening tool, or your fingers.
Some force is required
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 8 other contributors
Xavier
Member since: 10/02/2014
313 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
Ohio State, Team 1-4, Buehl Fall 2014
Member of Ohio State, Team 1-4, Buehl Fall 2014
OSU-BUEHL-F14S1G4
4 Members
10 Guides authored
