Difficulty

Moderate

Steps

3

Time Required

                          10 - 15 minutes

Sections

2

  • Disassembling Olympus Stylus 725 SW Battery
  • 1 step
  • Disassembling Olympus Stylus 725 SW Back Panel
  • 2 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackOlympus Stylus 725 SW

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling Olympus Stylus 725 SW Battery
  • The battery is located on the bottom of the camera.
  • Remove the battery by placing your thumb on the bottom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed)
  • If the battery is dead, charge it for 60-90 minutes.
  • When installing a charged battery, align the battery appropriately. The positive signs and negative should line up.

The battery is located on the bottom of the camera.

Remove the battery by placing your thumb on the bottom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed)

If the battery is dead, charge it for 60-90 minutes.

When installing a charged battery, align the battery appropriately. The positive signs and negative should line up.

1024

Step 2

              Disassembling Olympus Stylus 725 SW Back Panel
  • Remove the four 3 mm long cover screws at the corners of the camera using a Phillips #00 screwdriver.
  • Remove the 2 mm long screws securing the sides of the camera which holds the back panel using a Phillips #00 screwdriver.

Remove the four 3 mm long cover screws at the corners of the camera using a Phillips #00 screwdriver.

Remove the 2 mm long screws securing the sides of the camera which holds the back panel using a Phillips #00 screwdriver.

Step 3

  • Be careful when removing the back cover; you will need to detach the connecting ribbons. Use tweezers if necessary.
  • Detach the ribbons using your thumb, sliding them out of their slots.
  • Set the back panel face up to keep the ribbons from touching anything.

Be careful when removing the back cover; you will need to detach the connecting ribbons. Use tweezers if necessary.

Detach the ribbons using your thumb, sliding them out of their slots.

Set the back panel face up to keep the ribbons from touching anything.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Bobby Hodges

Member since: 04/18/2010

49 Reputation

                                      6 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 33-71, Johann Spring 2010                        

                                                  Member of Cal Poly, Team 33-71, Johann Spring 2010 



                    CPSU-JOHANN-S10S33G71                     


                                            4 Members                     


                                            6 Guides authored