Difficulty

Moderate

Steps

11

Time Required

                          30 minutes

Sections

1

  • Phone
  • 11 steps

Flags

3

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackNokia Classic 2600c-2b

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Phone
  • Press down on the button located at the bottom of the phone, using the center ridge as a guide.
  • Pull the phone apart from the bottom, keeping the button pressed down.
  • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

Press down on the button located at the bottom of the phone, using the center ridge as a guide.

Pull the phone apart from the bottom, keeping the button pressed down.

CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

1024

Step 2

  • Remove the back cover to expose the battery.

Remove the back cover to expose the battery.

Step 3

  • Place a finger or plastic opening tool in the gap between the battery and the phone.
  • Gently lift the battery out.

Place a finger or plastic opening tool in the gap between the battery and the phone.

Gently lift the battery out.

Step 4

  • Locate the plastic latches on the left and right sides of the phone.
  • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.
  • CAUTION! Some force is required.

Locate the plastic latches on the left and right sides of the phone.

Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

CAUTION! Some force is required.

Step 5

  • Remove the faceplate with the number pad attached.

Remove the faceplate with the number pad attached.

Step 6

  • Turn the faceplate so the number pad faces downward.
  • Lift the number pad out of the faceplate.

Turn the faceplate so the number pad faces downward.

Lift the number pad out of the faceplate.

Step 7

  • Locate the six screws positions along the edges of the motherboard.
  • Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).
  • CAUTION! Place the screws in a secure location.

Locate the six screws positions along the edges of the motherboard.

Unscrew the six screws using the Torx 5 screwdriver (see Introduction for description of a Torx 5 screwdriver).

CAUTION! Place the screws in a secure location.

Step 8

  • Locate the orange ribbon tape connecting the metal display plate to the motherboard.
  • Lift the black latch attaching the tape to the motherboard.
  • Gently pull the tape out of the latch slot to remove the metal display.

Locate the orange ribbon tape connecting the metal display plate to the motherboard.

Lift the black latch attaching the tape to the motherboard.

Gently pull the tape out of the latch slot to remove the metal display.

Step 9

  • Using the plastic opening tool, gently pry off the motherboard from the plastic shell.
  • CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

Using the plastic opening tool, gently pry off the motherboard from the plastic shell.

CAUTION! When pulling the motherboard out, be careful not to damage the battery under the lower left hand corner of the motherboard.

Step 10

  • Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.
  • Gently pull the tape up to remove the display.

Turn the motherboard over and locate the orange ribbon tape connecting the display to the motherboard.

Gently pull the tape up to remove the display.

Step 11

  • Locate the camera component in the plastic shell removed from underneath the motherboard (It is one piece).
  • Gently pull out the camera component using either a finger or plastic opening tool.

Locate the camera component in the plastic shell removed from underneath the motherboard (It is one piece).

Gently pull out the camera component using either a finger or plastic opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Ian VanZandt

Member since: 02/14/2012

627 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       James Madison, Team 3-1, Klein Spring 2012                        

                                                  Member of James Madison, Team 3-1, Klein Spring 2012 



                    JMU-KLEIN-S12S3G1                     


                                            3 Members                     


                                            9 Guides authored