Difficulty

Easy

Steps

14

Time Required

                          5 - 10 minutes

Sections

6

  • Back Case
  • 1 step
  • Disassembling Nokia 3395 Battery
  • 1 step
  • Front Case
  • 1 step
  • Screen
  • 2 steps
  • Logic Board
  • 1 step
  • Inner Components
  • 8 steps

Flags

5

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackNokia 3395

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Hold the phone and push the white button with your thumb.
  • While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.

Hold the phone and push the white button with your thumb.

While pressing the button, slide the back plate up (towards the top of the phone) and off the phone.

1024

Step 2

              Disassembling Nokia 3395 Battery
  • Locate grey buttons beneath battery (shown).
  • Spread buttons simultaneously away from each other and the battery will pop out.
  • Remove battery from phone.

Locate grey buttons beneath battery (shown).

Spread buttons simultaneously away from each other and the battery will pop out.

Remove battery from phone.

Step 3

              Front Case
  • Where shown, spread the front faceplate and push forward.
  • Flip over the device, and pry the faceplate away.

Where shown, spread the front faceplate and push forward.

Flip over the device, and pry the faceplate away.

Step 4

              Screen
  • Remove six T6 screws.

Remove six T6 screws.

Step 5

  • Insert spudger between screen assembly and phone body.
  • Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

Insert spudger between screen assembly and phone body.

Spread apart as shown. Avoid damaging the screen assembly by removing the screen slowly.

Step 6

              Logic Board
  • Remove logic board as shown.

Remove logic board as shown.

Step 7

              Inner Components
  • Use the following legend to locate each component:
  • Microphone/power assembly.
  • Vibrating unit.
  • SIM card reader.
  • Audio speaker.
  • Power toggle button.
  • Battery connector.

Use the following legend to locate each component:

Microphone/power assembly.

Vibrating unit.

SIM card reader.

Audio speaker.

Power toggle button.

Battery connector.

Step 8

  • Insert spudger between power assembly/micro-phone and phone body.
  • Pry as shown and remove the power assembly/microphone.

Insert spudger between power assembly/micro-phone and phone body.

Pry as shown and remove the power assembly/microphone.

Step 9

  • Once located, the following components are easily removed by pulling them out with your hand.
  • Microphone/power assembly.
  • Vibrating unit.
  • SIM card reader.
  • Audio speaker.
  • Power toggle button.
  • Battery connector.

Once located, the following components are easily removed by pulling them out with your hand.

Step 10

  • Audio speaker.

Step 11

  • SIM card reader.

Step 12

  • Vibrating unit.

Step 13

  • Power toggle button.

Step 14

  • Battery connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Nico Lee

Member since: 04/19/2010

78 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 30-41, Garner Spring 2010                        

                                                  Member of Cal Poly, Team 30-41, Garner Spring 2010 



                    CPSU-GARNER-S10S30G41                     


                                            4 Members                     


                                            11 Guides authored