Disassembling Nokia 2366I Rear Case Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes            

Sections

2

• Battery
• 3 steps
• Rear Case
• 4 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

• BackNokia 2366i

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn off the phone.
• Position the phone so that the back side is in view.

Turn off the phone.

Position the phone so that the back side is in view.

1024

Step 2

• Apply pressure on the cover while simultaneously sliding the cover downward.
• Remove the back battery cover.

Apply pressure on the cover while simultaneously sliding the cover downward.

Remove the back battery cover.

Step 3

• Insert the spudger between the base of the phone and the phone battery.
• Position the phone so that the battery won’t fall out of the phone.
• Carefully lift the battery out of the phone.
• The battery lifts out of the phone easily.

Insert the spudger between the base of the phone and the phone battery.

Position the phone so that the battery won’t fall out of the phone.

Carefully lift the battery out of the phone.

The battery lifts out of the phone easily.

Step 4

              Rear Case               

• Use a Phillips #00 screwdriver or your fingers to remove the rubber tabs at top back of the phone.

Use a Phillips #00 screwdriver or your fingers to remove the rubber tabs at top back of the phone.

Step 5

• Remove four 5mm screws from the back of the phone using a T6 Torx screwdriver:
• 2 screws at the bottom
• 2 screws at the top

Remove four 5mm screws from the back of the phone using a T6 Torx screwdriver:

2 screws at the bottom

2 screws at the top

Step 6

• Rotate the phone clockwise so the edge is facing you.
• Insert the spudger in tabs between the outer casing and the inside frame.
• Slide the spudger upwards.
• This will remove the rear case of the phone.

Rotate the phone clockwise so the edge is facing you.

Insert the spudger in tabs between the outer casing and the inside frame.

Slide the spudger upwards.

This will remove the rear case of the phone.

Step 7

• The phone should now be in two different sections.
• 1. The rear case of the phone.
• 2. The motherboard and the rest of the phone.

The phone should now be in two different sections.

1. The rear case of the phone.

2. The motherboard and the rest of the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 6 other contributors 

                    Jonathan Newman                     

Member since: 01/21/2011

486 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 1-14, Amido Winter 2011                        

                                                  Member of Cal Poly, Team 1-14, Amido Winter 2011 



                    CPSU-AMIDO-W11S1G14                     


                                            5 Members                     


                                            16 Guides authored