Difficulty
Moderate
Steps
16
Time Required
Suggest a time??
Sections
4
- Camera Back
- 2 steps
- Screen Bracket
- 1 step
- Remove front of camera
- 4 steps
- Disassembling Nikon Coolpix 5600 Flash Unit
- 9 steps
Flags
6
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Missed a Step
Oops! This guide is currently missing some important steps.
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Better Introduction
Improve this guide by completing or revising its introduction.
BackNikon Coolpix 5600
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove Screws
- Remove the screws from the bottom, right, and left side of camera.
Remove the screws from the bottom, right, and left side of camera.
1024
Step 2
Remove back
- Remove the back of the camera, this may require force.
Remove the back of the camera, this may require force.
Step 3
Remove Metal Bracket
- Unscrew the right metal bracket of the viewing lens
Unscrew the right metal bracket of the viewing lens
Step 4
Remove front of camera
- Unscrew the top right corner screw
Unscrew the top right corner screw
Step 5
- Unscrew the bottom right corner screw.
Unscrew the bottom right corner screw.
Step 6
- Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.
Step 7
- Pull the front of the camera off of the mother board.
Pull the front of the camera off of the mother board.
Step 8
Disassembling Nikon Coolpix 5600 Flash Unit
- Unscrew the grey plastic around the screen
Unscrew the grey plastic around the screen
Step 9
- Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
Twist the grey bracket counterclockwise to remove it from the silver LCD bracket.
Step 10
- Maneuver to detach the flash bulb.
Maneuver to detach the flash bulb.
Step 11
- Unscrew the metal bracket under the lens
Unscrew the metal bracket under the lens
Step 12
- Slide the plastic bracket through the metal bracket.
Slide the plastic bracket through the metal bracket.
Step 13
- Remove the orange cable from the motherboard.
Remove the orange cable from the motherboard.
Step 14
- Pull the black tape off.
Pull the black tape off.
Step 15
- Unscrew the two screws underneath.
Unscrew the two screws underneath.
Step 16
- Remove lens
Remove lens
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Crista Riedy
Member since: 02/12/2013
406 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
Ohio State, Team 1-2, Buehl Spring 2013
Member of Ohio State, Team 1-2, Buehl Spring 2013
OSU-BUEHL-S13S1G2
2 Members
7 Guides authored