Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

  • Phone
  • 7 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackMotorola Q700 Sidekick

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Phone
  • When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.

When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.

1024

Step 2

  • Turn the phone face-down. Remove the back cover, exposing the battery.
  • Use the Plastic Opening Tool to pry the battery out of the phone.

Turn the phone face-down. Remove the back cover, exposing the battery.

Use the Plastic Opening Tool to pry the battery out of the phone.

Step 3

  • Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
  • Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.

Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.

Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.

Step 4

  • After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.

After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.

Step 5

  • Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.

Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.

Step 6

  • On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.

On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.

Step 7

  • You should now have all of the pieces separated and disassembled for your device.

You should now have all of the pieces separated and disassembled for your device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Rich

Member since: 04/08/2013

125 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       SUNY Cortland, Team 1-4, Getto Spring 2013                        

                                                  Member of SUNY Cortland, Team 1-4, Getto Spring 2013 



                    SUNYCORT-GETTO-S13S1G4                     


                                            4 Members                     


                                            6 Guides authored