Disassembling Marshall Ms 2 Partner Circuit Board Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Disassembling Marshall MS-2 Micro Amp Case Disassembly
4 steps
Partner Circuit Board
3 steps

Flags

BackMarshall MS-2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Disassembling Marshall MS-2 Micro Amp Case Disassembly

First be sure to turn the power switch to the off position.
Do this by turning the leftmost knob counter-clockwise as until the line points to “off.”

First be sure to turn the power switch to the off position.

Do this by turning the leftmost knob counter-clockwise as until the line points to “off.”

1024

Step 2

Now remove the battery.
On the back of the device locate the battery cover.
Remove it by pushing down on the clip.
Then pull the piece of fabric until the battery comes out.

Now remove the battery.

On the back of the device locate the battery cover.

Remove it by pushing down on the clip.

Then pull the piece of fabric until the battery comes out.

Step 3

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.
Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

Step 4

Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

Step 5

              Partner Circuit Board

Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

Use a 9/16" socket to remove the nut around the headphone jack. Be careful to not lose the washer.

Step 6

Remove the 7/16" phillips head screw.

Remove the 7/16" phillips head screw.

Step 7

Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

Grab the headphone jack from inside the case and pull it toward the speaker until you can fully remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors

                    MacKinley

Member since: 10/22/2013

789 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       University of Maryland, Team 1-1, Shastany Fall 2013                        

                                                  Member of University of Maryland, Team 1-1, Shastany Fall 2013 



                    UMD-SHASTANY-F13S1G1                     


                                            3 Members                     


                                            5 Guides authored

Jack redmond - Dec 21, 2020

There Is a toroidal transformer inside ?

What you need#

Team#

What you need

Team