Disassembling Marshall Ms 2 Micro Amp Case Disassembly Repair Guide

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

• Disassembling Marshall MS-2 Micro Amp Case Disassembly
• 4 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackMarshall MS-2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Disassembling Marshall MS-2 Micro Amp Case Disassembly               

• First be sure to turn the power switch to the off position.
• Do this by turning the leftmost knob counter-clockwise as until the line points to “off.”

First be sure to turn the power switch to the off position.

Do this by turning the leftmost knob counter-clockwise as until the line points to “off.”

1024

Step 2

• Now remove the battery.
• On the back of the device locate the battery cover.
• Remove it by pushing down on the clip.
• Then pull the piece of fabric until the battery comes out.

Now remove the battery.

On the back of the device locate the battery cover.

Remove it by pushing down on the clip.

Then pull the piece of fabric until the battery comes out.

Step 3

• Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.
• Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

Use the long, skinny phillips head screwdriver to remove the 4 7/16" screws on the back of the device in the four corners.

Once unscrewed, do not try to take each screw out. Move to next step once all screwed have been unscrewed.

Step 4

• Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

Now pull the back panel off and place it down as shown. Pull the panel straight up so you do not lose the screws.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    MacKinley                     

Member since: 10/22/2013

789 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       University of Maryland, Team 1-1, Shastany Fall 2013                        

                                                  Member of University of Maryland, Team 1-1, Shastany Fall 2013 



                    UMD-SHASTANY-F13S1G1                     


                                            3 Members                     


                                            5 Guides authored