Difficulty
Moderate
Steps
14
Time Required
30 - 45 minutes
Sections
1
- Entire phone
- 14 steps
Flags
3
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackLG420G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Entire phone
- Start with gathering tools needed
Start with gathering tools needed
1024
Step 2
- Start with the back of the phone (the battery and cover has already been taken out.)
Start with the back of the phone (the battery and cover has already been taken out.)
Step 3
- Place finger to take out the sim card. Then take out sim card.
Place finger to take out the sim card. Then take out sim card.
Step 4
- Locate Screws
Locate Screws
Step 5
- Unscrew the six screws.
Unscrew the six screws.
Step 6
- With tweezers, pry around the sides to expose the circuitry.
With tweezers, pry around the sides to expose the circuitry.
Step 7
- Remove the back part of the phone to expose the layers inside.
Remove the back part of the phone to expose the layers inside.
Step 8
- Remove small parts from the sides.
Remove small parts from the sides.
Step 9
- Remove the layer connected with the keypad.
Remove the layer connected with the keypad.
Step 10
- Release the keypad from the phone frame.
Release the keypad from the phone frame.
Step 11
- With a prying tool, start opening the front face of the phone.
With a prying tool, start opening the front face of the phone.
Step 12
- Remove the front cover, exposing the layers inside.
Remove the front cover, exposing the layers inside.
Step 13
- Pry open the glued layer.
Pry open the glued layer.
Step 14
- Remove all loose part, and should result in the components shown in the picture.
Remove all loose part, and should result in the components shown in the picture.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Anthony Aquino
Member since: 04/10/2014
155 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
University of Maryland, Team 1-6, Calloway Spring 2014
Member of University of Maryland, Team 1-6, Calloway Spring 2014
UMD-CALLOWAY-S14S1G6
1 Member
1 Guide authored
