Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

1

  • Disassembling LG VX8300 Body
  • 5 steps

Flags

0

  • BackLG VX8300

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling LG VX8300 Body
  • Power off the device by holding down the red button labeled PWR.
  • Be sure that the phone is powered off before touching the battery to avoid danger.
  • Remove the battery pack cover by pushing down on the solid lines at the top end of the cover. Slide the cover down while applying the pushing force at the top to remove the cover completely.

Power off the device by holding down the red button labeled PWR.

Be sure that the phone is powered off before touching the battery to avoid danger.

Remove the battery pack cover by pushing down on the solid lines at the top end of the cover. Slide the cover down while applying the pushing force at the top to remove the cover completely.

1024

Step 2

  • Place your finger into the semicircle gap on top of the battery.
  • Apply force downward and out, so the battery pops out of the phone.

Place your finger into the semicircle gap on top of the battery.

Apply force downward and out, so the battery pops out of the phone.

Step 3

  • Locate the two rubber pads covering the screws at the top of the phone near the hinge.
  • Use tweezers to lift and remove the rubber pads.

Locate the two rubber pads covering the screws at the top of the phone near the hinge.

Use tweezers to lift and remove the rubber pads.

Step 4

  • Use a Phillips #00 screwdriver to remove all four 3mm screws from the back of the phone.

Use a Phillips #00 screwdriver to remove all four 3mm screws from the back of the phone.

Step 5

  • Use your fingers to gently separate the front plate from the phone. You may need to slide a plastic opening tool along the crevice between the faces to separate it more easily.
  • Remove the casing after it has been detached. The logic board is now fully accessible.
  • Once the body case is removed, the volume and camera buttons move freely. Ensure all loose pieces remain accounted for.

Use your fingers to gently separate the front plate from the phone. You may need to slide a plastic opening tool along the crevice between the faces to separate it more easily.

Remove the casing after it has been detached. The logic board is now fully accessible.

Once the body case is removed, the volume and camera buttons move freely. Ensure all loose pieces remain accounted for.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 9 other contributors 


                    nvalm

Member since: 03/23/2015

448 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 3-7, Duarte Spring 2015                        

                                                  Member of UMass Dartmouth, Team 3-7, Duarte Spring 2015 



                    UMASSD-DUARTE-S15S3G7                     


                                            3 Members                     


                                            10 Guides authored