Disassembling Konnet Powerez Pro External Battery Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          10 minutes            

Sections

1

• External Rechargable Battery
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackKonnet PowerEZ Pro External Battery

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              External Rechargable Battery               

• Take a small flat screwdriver or any plastic opening tool and start to remove the silver cover.
• The backing has lots of double sided tape to hold this down so some force will be required.

Take a small flat screwdriver or any plastic opening tool and start to remove the silver cover.

The backing has lots of double sided tape to hold this down so some force will be required.

1024

Step 2

• Remove 4 Philips screws to release the plastic cover

Remove 4 Philips screws to release the plastic cover

Step 3

• Carefully push from the side you just opened. All the inside parts should slide out from the back of the unit.

Carefully push from the side you just opened. All the inside parts should slide out from the back of the unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Mike                     

Member since: 07/10/2014

191 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge