Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Back Cover
  • 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackKodak Advantix F350

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover
  • Turn off the camera.
  • Locate the power switch on the front of the camera below the camera lens.
  • Slide the switch to the off position.

Turn off the camera.

Locate the power switch on the front of the camera below the camera lens.

Slide the switch to the off position.

1024

Step 2

  • Locate the 3 screws that hold the back cover to the camera.
  • One screw is located on the film opener side of the camera.
  • The other screws are located on the opposite side of the camera.

Locate the 3 screws that hold the back cover to the camera.

One screw is located on the film opener side of the camera.

The other screws are located on the opposite side of the camera.

Step 3

  • Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.

Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.

Step 4

  • Open the film door to remove the back cover.
  • Slide the film door lever to the left until the film door opens.

Open the film door to remove the back cover.

Slide the film door lever to the left until the film door opens.

Step 5

  • Use a plastic opening tool to pry the case open until a small gap is present.
  • Repeat this process at the top and bottom of the film door to loosen it.

Use a plastic opening tool to pry the case open until a small gap is present.

Repeat this process at the top and bottom of the film door to loosen it.

Step 6

  • Grab the top and bottom of the case firmly as shown.
  • Gently remove the back of the camera case with a slight twisting motion.

Grab the top and bottom of the case firmly as shown.

Gently remove the back of the camera case with a slight twisting motion.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 


                    David Cottrell

Member since: 10/04/2011

88 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UW Stout, Team 1-2, Zhou Fall 2011                        

                                                  Member of UW Stout, Team 1-2, Zhou Fall 2011 



                    UWSTOUT-ZHOU-F11S1G2                     


                                            4 Members                     


                                            10 Guides authored