Difficulty

Moderate

Steps

8

Time Required

                          15 minutes

Sections

2

  • Disassembling KDDI Kyocera A5521K Battery
  • 2 steps
  • Faceplate
  • 6 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

  • BackKDDI Kyocera A5521K

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling KDDI Kyocera A5521K Battery
  • Turn the phone over to expose the battery cover.
  • Apply pressure to the back of the battery cover to slide it down.
  • The battery cover is now separate from the phone.

Turn the phone over to expose the battery cover.

Apply pressure to the back of the battery cover to slide it down.

The battery cover is now separate from the phone.

1024

Step 2

  • Remove the battery by pushing it up and out from the bottom.
  • The battery, cover, and phone should now be separated.

Remove the battery by pushing it up and out from the bottom.

The battery, cover, and phone should now be separated.

Step 3

              Faceplate
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.
  • Beneath the covers are screws.

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

Beneath the covers are screws.

Step 4

  • Remove the screws using a Y0 screwdriver.

Remove the screws using a Y0 screwdriver.

Step 5

  • Use the iPod pry tool to remove the outer screen.
  • Two screws are now visible.
  • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Use the iPod pry tool to remove the outer screen.

Two screws are now visible.

Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Step 6

  • Use the Y0 screwdriver to remove the screws.

Use the Y0 screwdriver to remove the screws.

Step 7

  • Use the iPod pry tool to loosen the faceplate from the phone.
  • Slide the pry tool along the entire crease of the faceplate to completely detach it.

Use the iPod pry tool to loosen the faceplate from the phone.

Slide the pry tool along the entire crease of the faceplate to completely detach it.

Step 8

  • Separate the faceplate from the phone.

Separate the faceplate from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Dominic Grisafe

Member since: 04/15/2010

157 Reputation

                                      10 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 28-25, Regan Spring 2010                        

                                                  Member of Cal Poly, Team 28-25, Regan Spring 2010 



                    CPSU-REGAN-S10S28G25                     


                                            4 Members                     


                                            20 Guides authored