Difficulty

Difficult

Steps

3

Time Required

                          15 - 45 minutes            

Sections

1

  • Back Case
  • 3 steps

Flags

0

  • BackIBM WorkPad c3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case               
  • Turn the device over so that the screen is facing down.
  • In the next step the device will be heated, so the screen must be turned over to prevent heat damage to the LCD/Digitizer.

Turn the device over so that the screen is facing down.

In the next step the device will be heated, so the screen must be turned over to prevent heat damage to the LCD/Digitizer.

1024

Step 2

  • Using a hair dryer, slowly heat the edges of the WorkPad.
  • Spend at least one minute heating each side of the device. This will melt the glue holding the case together, and allow it to be removed.
  • Be sure not to touch the device directly after heating as it will be extremely hot. Use a towel or oven mitt to grab it.

Using a hair dryer, slowly heat the edges of the WorkPad.

Spend at least one minute heating each side of the device. This will melt the glue holding the case together, and allow it to be removed.

Be sure not to touch the device directly after heating as it will be extremely hot. Use a towel or oven mitt to grab it.

Step 3

  • Use a plastic opening tool to pry the back case from the WorkPad.
  • If the rear cover is not coming off very easily, you probably need to reheat the case in order to sufficiently melt the glue.

Use a plastic opening tool to pry the back case from the WorkPad.

If the rear cover is not coming off very easily, you probably need to reheat the case in order to sufficiently melt the glue.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Emily Falkenstein                     

Member since: 10/05/2010

75 Reputation

                                      5 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 21-35, Regan Fall 2010                        

                                                  Member of Cal Poly, Team 21-35, Regan Fall 2010 



                    CPSU-REGAN-F10S21G35                     


                                            3 Members                     


                                            5 Guides authored